View OSP1G10WW2031C1000-3133-4Q9X_2165058.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

cdw-031 orbeos tm for oled lighting lead (pb) free product - rohs compliant vorl?ufige daten / preliminary data 2009-11-18 1 besondere merkmale ? format: lichtkachel ? besonderheit des bauteils: blendfreie homogene fl?chen-lichtquelle, au?ergew?hnlich dnn (2.1 mm), schnelle schaltzeiten, hohe lichtqualit?t, sehr gute farbwiedergabe, enth?lt kein quecksilber ? farbe: warm wei? ? emissionsfl?che: ? 79.00 mm ? aussenabmessung: siehe ma?zeichnung ? kontaktierung: 4 kontaktleisten anwendungen ? designer leuchten ? dekorative beleuchtung, stimmungslicht ? funktionelle beleuchtung ? allgemeinbeleuchtung features ? format: lighting tile ? feature of the device: non glaring uniform area light source, exceptionally thin (2.1 mm), instant on/off, high quality of light, very good colour rendering, mercury-free ? color: warm white ? light output area: ? 79.00 mm ? glass size: refer to product drawing ? interconnect: 4 contact ledges applications ? designer luminaires ? decorative lighting, mood lighting ? functional lichting ? general lighting .
2009-11-18 2 vorl?ufige daten / preliminary data cdw-031 bestellinformation ordering information typ type geh?use cap film film bestellnummer ordering code OSP1G10WW2031C1000-3133-4Q9X osp1g10ww2031c1000-32-4q9x none none diffusing film diffusing film q65110a9761 q65110a9764
vorl?ufige daten / preliminary data cdw-031 2009-11-18 3 anm.: betriebsstre? unter strengeren bedingungen als in den unter ?grenzwerte? angegebenen kann zu permanenten sch?digungen des bauteils fhr en und die zuverl?ssigkeit beeintr?chtigen. l?ngerer betrieb unter grenzwertbedi ngungen kann zu permanenten sch?digungen des bauteils fhren und die zuve rl?ssigkeit beeintr?chtigen. note: stresses above those listed under ?maximum ratings? may cause permanent damage to the device. exposure to maximum rati ng conditions for extended periods may affect device reliability grenzwerte maximum ratings bezeichnung parameter symbol symbol wert value einheit unit relative luftfeuchtigkeit relative humidity rh 40/93% % betriebstemperatur operating temperature range t op ? 20 ? + 40 c lagertemperatur storage temperature range t stg ? 40? + 60 c aussendruck (min.) pressure operating and storage (max.) ( t a =25c) p op /p stg 0.800 1.200 bar bar durchlassspannung 4) seite 20 ) (max.) forward voltage 4) page 20 ( t a =25c) v f 4.5 v durchlassstrom (max.) forward current ( t a =25c) i f i f 400 ma sperrspannung reverse voltage ( t a =25c) v r not designed for reverse operation v
2009-11-18 4 vorl?ufige daten / preliminary data cdw-031 elektrische und optische kennwerte 2) seite 20 electrical / optical characteristics 2) page 20 ( t a = 25 c) bezeichnung parameter symbol symbol wert value einheit unit durchlassspannung 4) seite 20 ) (min.) forward voltage 4) page 20 (typ.) i f = 186 ma , t a =25c (max.) v f v f v f 3.15 3.4 3.65 v v v leistungsaufnahme (min.) power consumption (typ.) i f = 186 ma , t a =25c (max.) p p p 0.59 0.65 0.71 w w w leuchtdichte* 1) seite 20 (typ.) luminance* 1) page 20 (typ.) t a =25c (typ.) l(186 ma) l (93 ma) l (46.5 ma) 1000 500 250 cd/m 2 cd/m 2 cd/m 2 lichtausbeute (min) luminous efficacy (typ.) i f = 186 ma , t a =25c (max) 20 23 - lm/w lm/w lm/w farbkoordinate x/y nach cie 1931 3) seite 20 chromaticity coordinate x/y acc. to cie 1931 3) page 20 (typ.) i f = 186 ma x/y 0.46/0.42 ? farbtemperatur (min.) color temperature (typ.) i f = 186 ma , t a =25c (max.) cct cct cct 2580 2800 3320 k k k farbwiedergabeindex color rendering index (typ.) i f = 186 ma , t a =25c cri 75 - leuchtdichte uniformit?t** (min.) luminance uniformity** i f = 186 ma , t a =25c , = = 0 (max.) u u u 75 100 % % % abstrahlwinkel bei 50 % v (vollwinkel) viewing angle at 50 % v (typ.) 2 ? 120 deg. sperrstrom / sperrspannung reverse current / reverse voltage i r, v r not designed for reverse operation * einzelgruppen siehe seite 8 individual groups on page 8 ** leuchtdichte uniformit?t ist definiert als: u = 1-(lmax -lmin)/(l max+lmin) * 100% luminance uniformity is determined according to following formula: u = 1-(lmax -lmin)/(l max+lmin) * 100%
vorl?ufige daten / preliminary data cdw-031 2009-11-18 5 farbortgruppen 3) seite 20 chromaticity coordinate groups 3) page 20 gruppe group cx cy gruppe group cx cy 9q 0.4198 0.4115 9u 0.4562 0.4260 0.4232 0.4201 0.4609 0.4352 0.4337 0.4253 0.4674 0.4367 0.4299 0.4165 0.4625 0.4275 8q 0.4164 0.4029 8u 0.4515 0.4168 0.4198 0.4115 0.4562 0.4260 0.4299 0.4165 0.4625 0.4275 0.4261 0.4077 0.4576 0.4182 7q 0.4129 0.3944 7u 0.4467 0.4076 0.4164 0.4029 0.4515 0.4168 0.4261 0.4077 0.4576 0.4182 0.4223 0.3989 0.4526 0.4090 6q 0.4095 0.3858 6u 0.4420 0.3985 0.4129 0.3944 0.4467 0.4076 0.4223 0.3989 0.4526 0.4090 0.4185 0.3902 0.4477 0.2998
2009-11-18 6 vorl?ufige daten / preliminary data cdw-031 5q 0.4061 0.3773 5u 0.4373 0.3893 0.4095 0.3858 0.4420 0.3985 0.4185 0.3902 0.4477 0.3998 0.4147 0.3814 0.4428 0.3906 4q 0.4027 0.3687 4u 0.4326 0.3801 0.4061 0.3773 0.4373 0.3893 0.4147 0.3814 0.4428 0.3906 0.4109 0.3726 0.4379 0.3813 9r 0.4299 0.4165 9v 0.4625 0.4275 0.4337 0.4253 0.4674 0.4367 0.4428 0.4286 0.4739 0.4382 0.4387 0.4197 0.4688 0.4290 8r 0.4261 0.4077 8v 0.4576 0.4182 0.4299 0.4165 0.4625 0.4275 0.4387 0.4197 0.4688 0.4290 0.4346 0.4108 0.4636 0.4197 7r 0.4223 0.3989 7v 0.4526 0.4090 0.4261 0.4077 0.4576 0.4182 0.4346 0.4108 0.4636 0.4197 0.4304 0.4018 0.4585 0.4104 6r 0.4185 0.3902 6v 0.4477 0.3998 0.4223 0.3989 0.4526 0.4090 0.4304 0.4018 0.4585 0.4104 0.4263 0.3929 0.4534 0.4011 5r 0.4147 0.3814 5v 0.4428 0.3906 0.4185 0.3902 0.4477 0.3998 0.4263 0.3929 0.4534 0.4011 0.4222 0.3840 0.4483 0.3918 4r 0.4109 0.3726 4v 0.4379 0.3813 0.4147 0.3814 0.4428 0.3906 0.4222 0.3840 0.4483 0.3918 0.4181 0.3751 0.4432 0.3826 9s 0.4387 0.4197 9w 0.4688 0.4290 0.4428 0.4286 0.4739 0.4382 0.4518 0.4319 0.4803 0.4398 0.4474 0.4228 0.4750 0.4304 8s 0.4346 0.4108 8w 0.4636 0.4197 0.4387 0.4197 0.4688 0.4290 0.4474 0.4228 0.4750 0.4304 0.4430 0.4138 0.4697 0.4211 gruppe group cx cy gruppe group cx cy
vorl?ufige daten / preliminary data cdw-031 2009-11-18 7 7s 0.4304 0.4018 7w 0.4585 0.4104 0.4346 0.4108 0.4636 0.4197 0.4430 0.4138 0.4697 0.4211 0.4386 0.4047 0.4644 0.4118 6s 0.4263 0.3929 6w 0.4534 0.4011 0.4304 0.4018 0.4585 0.4104 0.4386 0.4047 0.4644 0.4118 0.4342 0.3957 0.4591 0.4028 5s 0.4222 0.3840 5w 0.4483 0.3918 0.4263 0.3929 0.4534 0.4011 0.4342 0.3957 0.4591 0.4024 0.4298 0.3867 0.4538 0.3931 4s 0.4181 0.3751 4w 0.4432 0.3826 0.4222 0.3840 0.4483 0.3918 0.4298 0.3867 0.4538 0.3931 0.4253 0.3776 0.4485 0.3838 9t 0.4474 0.4228 9x 0.4750 0.4304 0.4518 0.4319 0.4803 0.4398 0.4609 0.4352 0.4868 0.4413 0.4562 0.4260 0.4813 0.4319 8t 0.4430 0.4138 8x 0.4697 0.4211 0.4474 0.4228 0.4750 0.4304 0.4562 0.4260 0.4813 0.4319 0.4515 0.4168 0.4758 0.4225 7t 0.4386 0.4047 7x 0.4644 0.4118 0.4430 0.4138 0.4697 0.4211 0.4515 0.4168 0.4758 0.4225 0.4467 0.4076 0.4703 0.4132 6t 0.4342 0.3957 6x 0.4591 0.4024 0.4386 0.4047 0.4644 0.4118 0.4467 0.4076 0.4703 0.4132 0.4420 0.3985 0.4648 0.4038 5t 0.4298 0.3867 5x 0.4538 0.3931 0.4342 0.3957 0.4591 0.4024 0.4420 0.3985 0.4648 0.4038 0.4373 0.3893 0.4593 0.3944 4t 0.4253 0.3776 4x 0.4485 0.3838 0.4298 0.3867 0.4538 0.3931 0.4373 0.3893 0.4593 0.3944 0.4326 0.3801 0.4538 0.3850 gruppe group cx cy gruppe group cx cy
2009-11-18 8 vorl?ufige daten / preliminary data cdw-031 helligkeits-gruppierungsschema brightness groups leuchtdichtegruppe luminance group leuchtdichtebereich 1) seite 20 luminance range 1) page 20 cd/m 2 anmerkung comment 31 32 33 800... 920 920 ... 1060 1060 ... 1220 - - - exemplarische durchschnittliche lebensdauer exemplary median lifetime t a = 25c bedingungen conditions mittlere lebensdauer median lifetime einheit unit i f = 186 ma 5000 betriebsstunden operating hours i f = 93 ma 10000 betriebsstunden operating hours i f = 46.5 ma 15000 betriebsstunden operating hours anm.: die mittlere lebensdauer ist die zeit, in der das bauteil unt er den angegebenen bedingungen 50% der anfangshelligkeit erreicht. in dieser zeit kann die spannung um bis zu 1 v ansteigen. note: operating lifetime is time to half luminance; given as above table at 25c at typical brightness level, until 50% of initial lumi nance is reached. the forward vo ltage may increase during lifetime up to 1 v.
vorl?ufige daten / preliminary data cdw-031 2009-11-18 9 relative spektrale emission 2) seite 20 relative spectral emission 2) page 20 rel = f ( ); t a = 25 c; i f = 186 ma abstrahlcharakteristik 2) seite 20 radiation characteristic 2) page 20 rel = f ( ? ); t a = 25 c
vorl?ufige daten / preliminary data cdw-031 2009-11-18 10 relative durchlassspannung 2)4) seite 20 relative forward voltage 2)4) page 20 v f /v 0 = f ( i f / i 0 ); t a = 25 c; i 0 = 186 ma farbortverschiebung 2) seite 20 chromaticity coordinate shift 2) page 20 cx = f ( i f / i 0 ); cy= f ( i f / i 0 ); t a = 25 c; i 0 = 186 ma relative leuchtdichte 2) seite 20 relative luminance 2) page 20 l/l 0 = f ( i f / i 0 ); t a = 25 c; i 0 = 186 ma
vorl?ufige daten / preliminary data cdw-031 2009-11-18 11 ma?zeichnung 5) seite 20 package outlines 5) page 20
2009-11-18 12 vorl?ufige daten / preliminary data cdw-031 polarit?ten polarity information anm.: zwei kontaktleisten zeigen auf der emissiven seit e kamm-artige strukturen. damit sind die kathodenkontakte definiert. die beiden anderen kontaktleisten sind anodenkontakte. um die beste homogenit?t im leuchtdichtebild zu erzeugen, sollten alle 4 kontakte angebunden werden. note: two contact ledges exhibit visible comb structures at the amissive side. these comb structures denote the cathode contacts. the other two contact ledges have a node polarity. to achieve best luminance uniformity connect all 4 contact ledges. interconnect information for interconnect, please use spring co ntact, zebra connectors of acf flex bonding. direct soldering onto the contact ledges is not possible. soldering and interconnect technol ogies which apply heat to the light output area are not recommended and may cause ol ed damage. for special modulisation support please contact osram opto semiconductors. for further general handling and precaution notes please refer to page 17
vorl?ufige daten / preliminary data cdw-031 2009-11-18 13 verpackung 5) seite 20 8 st. pro box = verpackungseinheit method of packing 5) page 20 8 pcs. per tray = packing unit produktidentifikation product marking legende legend os011: production line chip info (fixed) p1ww2: type abbreviation(fixed) 04 device number (01 to 20) 309 internal factory number 00699b run number 04 device number (01 to 20) os011 production line chip info (fixed)
2009-11-18 14 vorl?ufige daten / preliminary data cdw-031 kartonverpackung und materialien transportation packing and materials dimensions of transportation box in mm (inch) breite / width l?nge / length h?he / height 280 5 (11,02 0,19685 ) 395 5 (15,55 0,19685 ) 35 5 (1,38 0,19685 )
vorl?ufige daten / preliminary data cdw-031 2009-11-18 15 cosmetic criteria
2009-11-18 16 vorl?ufige daten / preliminary data cdw-031
vorl?ufige daten / preliminary data cdw-031 2009-11-18 17 general oled handling and care 1. mechanical handling 1.1. as oled is made of glass, do avoid mechanical stre ss such as shock and pressure onto glass during handling, especially at the center of the active area and also at the back of the cap glass cavity (to avoid glass crack, delamination and damage on internal structure). 1.2. for oled tile designed without a frame to protect the edges and corners of tile, do exercise caution to avoid glass chipping and breakage. 1.3. finger cots and gloves are recommended to be worn a ll the time when handling oled to avoid direct contact of glass or contacts with bare fingers that may leave finger print on glass. 1.4. hold the oled tile on side of tiles. avoid direct contact on metal contacting tr aces or connec tors traces. 1.5. unpack the packing box with care and remove oled t ile packing trays gently and carefully from packing box. 1.6. picking up oled tile by holdin g to side of tiles. do not unload tile by pulling the meta l contact traces. 1.7. do not stack oled tiles on top of each ot her to avoid scratches on film / glass surface. 1.8. in case of module (flex connetor or other type of conn ector), do not pull, press, or peel on the connector to glass contact area. this will cause module ma lfunctions with lift-up, peel-off contacts. 1.9. avoid corner contact to tile during assembly or in stallation to end products as glass can be easily chipped or cracked from rough handling. avoid pressing or dropping of glass. 1.10. do not submerge the module into any kind of solv ent or any other chemicals like acids, bases and salts. 1.11. wipe off water drops immediately. contact with water ov er a long period of time may cause damage of film, while an active oled tile with water condensation on it s surface will cause corrosion of metal traces. 1.12. handle the oled surface (glass or film) with care as it is easily scratched. avoid hard or sharp objects in contact with the tile surface. do not rub hardly on oled surface. 1.13. avoid touching exposed contact pads with bare finge rs. this will leave moisture on metal traces and cause corrosion. 1.14. for interconnect, please use spring contact, zebra c onnectors of acf flex bonding. soldering and interconnect technologies which apply heat to the light output area are not recommended and may cause oled damage. for special modulisation support please contact osram opto semiconductors. 2. cleaning below are cleaning procedures to remove particle/forei gn materials and glue / adhesive / surface stains: particle / foreign materials: it recommended to use non-abrasive cloth (recommended smartat cleanroom wipes wip-1009 d series) to gently wipe over the surface of the tile. glue / adhesive stains: method 1: do not use non-abrasive cloth (recommended smartat cleanr oom wipes wip-1009 d series) and applicator (dipped in iso-propanol or ethanol if necessary, no acetone ) to gently wipe over the surface of the tile. method 2: do use the finger cot to clean the stain on film.
2009-11-18 18 vorl?ufige daten / preliminary data cdw-031 3. storage and operating store and operate oled tile within specifi ed ratings as per product specifications. store oled tiles as they have been contained in the inner container at the time of delivery from osram opto semiconductors. keep the temperature within specif ied range for use and storage. recommended storage and operating temperature is at 25c. dry environmental conditi on with low humidity is preferred. relative humidity is recommended to be kept below 60% (rh) for operating and storage. film degradation, bubble generation, film peel-off may occure with high temperature and high humidity. 4. safety when handled with bare fingers, pay special attention to sharp glass edges to avoid potential injury. in case of oled breakage, please avoid direct contact. do not swallow chips and materials. 5. disposition consult qualified agencies on industrial waste treatment to dispose oled modules in accordance to regions environmental laws and regulations.
vorl?ufige daten / preliminary data cdw-031 2009-11-18 19 attention please! the information describes the type of component and shall not be considered as assured characteristics. terms of delivery and rights to change design reserved. due to technical requirements components may contain dangerous substances. for informati on on the types in question please contact our sales organization. if printed or downloaded, please find the latest version in the internet. packing please use the recycling operators known to you. we can also help you ? get in touch with your nearest sales office. by agreement we will take packing material back, if it is sorted. you must bear the costs of transport. for packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. components used in life-support devices or systems must be expressly authorized for such purpose! critical components 6) page 20 may only be used in life-support devices or systems 7) page 20 with the express written approval of osram os. revision history: 2009-11-18 previous version: page subjects (major changes since last revision) date of change all preliminary data sheet created 2009-11-18
vorl?ufige daten / preliminary data cdw-031 2009-11-18 20 fu?noten: 1) helligkeitswerte werden w?hrend eines strompulses einer typischen dauer von 25 ms, mit einer internen reproduzierbarkeit von +/- 8 % und einer erweiterten messunsicherheit von +/- 11 % gemessen (gem?? gum mit erweiterungsfaktor k = 3). 2) wegen der besonderen prozessbedingungen bei der herstellung von oled k?nnen typische oder abgeleitete technische parameter nur aufgrund statistischer werte wiedergegeben werden. diese stimmen nicht notwendigerweise mit den werten jedes einzelnen produktes berein, dessen werte sich von typischen und abgeleite ten werten oder typischen kennlinien unterscheiden k?nnen. falls erforderlich, z.b. aufgrund technischer verbesserungen, werden diese typischen werte ohne weitere ankndigung ge?ndert. 3) farbkoordinaten werden w?hrend eines strompulses einer typischen dauer von 25 ms, mit einer internen reproduzierbarkeit von +/- 0,005 und einer erweiterten messunsicherheit von +/- 0,01 gemessen (gem?? gum mit erweiterungsfaktor k = 3). 4) vorw?rtsspannungen werden w?hrend eines strompulses einer typischen dauer von 8 ms, mit einer internen reproduzierbarkeit von +/- 0,05 v und einer erweiterten messunsicherheit von +/- 0,1 v gemessen (gem?? gum mit erweiterungsfaktor k=3). 5) ma?e werden wie folgt angegeben: mm 6) ein kritisches bauteil ist ein bauteil, das in lebenserhaltenden apparaten oder systemen eingesetzt wird und dessen defekt voraussichtlich zu einer fehlfunktion dies es lebenserhaltenden apparates oder systems fhren wird oder die sicherheit oder effektivit?t dieses apparates oder systems beeintr?chtigt. 7) lebenserhaltende apparate oder systeme sind fr (a) die implantierung in den menschlichen k?rper oder (b) fr die lebenserhaltung bestimmt. falls sie versagen, kann davon ausgegangen werden, dass die gesundheit und das leben des patienten in gefahr ist. published by osram opto semiconductors gmbh leibnizstrasse 4, d-93055 regensburg www.osram-os.com ? all rights reserved. remarks: 1) brightness values are measured during a current pulse of typical 25 ms, with an internal reproducibility of +/- 8 % and an expanded uncertainty of +/- 11 % (acc. to gum with an expansion factor of k = 3). 2) due to the special conditions of the manufacturing processes of oled, the typical data or calculated correlations of technical parameters can only reflect statistical figures. these do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. if requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 3) chromaticity coordinates are measured during a current pulse of typical 25 ms, with an internal reproducibility of +/- 0,005 and an expanded uncertainty of +/- 0,01 (acc. to gum with an expansion factor of k = 3). 4) the forward voltage is measured during a current pulse of typical 8 ms, with an internal reproducibility of +/- 0,05 v and an expanded uncertainty of +/- 0,1 v (acc. to gum with an expansion factor of k=3). 5) dimensions are specified as follows: mm 6) a critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 7) life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. if they fail, it is reasonable to assume that the health and the life of the user may be endangered.

▲Up To Search▲

Price & Availability of OSP1G10WW2031C1000-3133-4Q9X

	To Download OSP1G10WW2031C1000-3133-4Q9X Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .